Disclaimer: Installing Samsung firmware using Odin software is not the official way to do it.

This method is used only if you want to unroot or reinstall an official firmware in case you’re using a Custom ROM.

Verify that the network path is correct and the destination computer is not busy or turned off.

all operations completed firmware updating succeeded-22

Specifically, I removed the RST pin from the Nucleo, and now ground it manually on the odd occasion I need to hard-reset the module.

Before we start our tutorial on using Samsung Odin and installing a Samsung firmware update, I’d like to take a moment and talk to you about phone unlocking.

Here is another method to fix your connection woes and if you are new to the site, we also wrote an article a while back to try this method as well: USB driver re-installation. Type ‘dir msxml*’ and enter in the command window 4.

If there is not an ‘msxml6.dll’ file shown in the list, download the file from the following link and make sure to leave your command prompt window open, you’ll need it for later.

If joining a workgroup, choose another workgroup name.

If an MM error is returned which is not defined in the standard Fs Rtl filter, it is converted to one of the following errors which is guaranteed to be in the filter.

You were not connected because a duplicate name exists on the network.

If joining a domain, go to System in Control Panel to change the computer name and try again.

Inside the esp_file, you will find a couple of files, an executable named XTCOM_and also a file containing the addresses to flash each of the files to, which I will duplicate here for reference anymore.

I have also had to move/remove some of the connections between the ESP8266 module and the Nucleo once putting the module back.

Windows 2000, 2003 and XP do not support big drives by default; you will have to install the latest service pack in order to get big drives working properly on these OS.